Elevating trailer Senko

The lowerable all-rounder

Sturdy and durable
i

Welded drop-side-/ frame construction made by steel sheet, hot-dip galvanised.

i

Screwed V-drawbar, hot-dip galvanised

i

13-pole plug and reversing light.

i

Hot-dip galvanised ramp gate with anti-slip grid covering as well as gas spring support (approx. 1240 mm height, tested for an axle load of 2500 kg).

i

Full automatic jockey wheel

i

Steel mudguards, opening and closing automatically during lowering process.

i

Lighting, mounted lateral

i

Tilting hydraulic with manual pump.

i

Lashing points mounted in external frame, 10 pcs (5 pairs) at 3000 mm and 12 pcs (6 pairs) at 3750/3990 mm internal length, traction force 1000 kg per lashing ring.

This trailer can even be used to load vehicles with very little road clearance. Simply use the hydraulics to lower the loading platform either using a manual pump or - as an optional extra to make your work even easier - with the help of an electric motor. The lowerable rubber spring axles will provide you with an extremely shallow loading angle. The Senko is also enormously robust. The drop sides made from 3-mm steel plate are strong enough to handle even the heaviest loads. Each of the ten lashing rings has been DEKRA-approved for a tensile load of 800 kg. Naturally, all vehicle components have been hot-dip galvanised.

The elevating trailer Senko in detail:

Welded drop-side-/ frame construction
Screwed V-drawbar, hot-dip galvanised
13-pole plug and reversing light
Hot-dip galvanised ramp gate
Full automatic jockey wheel
Movable Steel mudguards
Lighting, mounted lateral
Tilting hydraulic with manual pump
Lashing points mounted in external frame

Technical data

Senko

Trailer Senko in detail
Senko silhouette sideview
Inner height 270 mmTotal height 1.740 mm
Inner length 3.000 mmTotal length 4.680 mm
Senko silhouette backside
Inner width 1.600 mmTotal width 2.230 mm

Senko Standard equipment

  • Welded drop-side-/frame construction made by steel plate, hot-dip galvanized
  • Welded V-drawbar, hot-dip galvanized
  • 13-pin plug and reversing light
  • Hot-dip galvanised ramp wall with anti-slip grating, which is also gas spring supported (height approx. 1240 mm, tested on 2400 kg axle)
  • Lashingrings mounted in external frame (5 pairs at 3000 mm / 6 pairs at 3750 mm internal length.), traction force 1000 kg per lashing ring
  • Fully automatic support wheel
  • Steel mudguard, opens and closes automatically during the lowering process
  • Lighting mounted on the side
  • Lowering hydraulics with hand pump

Senko Models

Permissible gross weight in kg
3000
3500
3000
3500
Load capacity in kg
2260
2740
2140
2620
Body dimensions in mm (LxWxH)
4750 x 2230 x 1740
4680 x 2230 x 1740
5500 x 2480 x 1740
5470 x 2480 x 1740
Internal dimensions in mm (LxWxH)
3000 x 1600 x 270
3000 x 1600 x 270
3750 x 1850 x 270
3750 x 1850 x 270
braked
Load height in mm
470
470
470
470
Tyre size in inches
13
13
13
13

Senko 303016

Permissible gross weight in kg
3000
braked
Body dimensions in mm (LxWxH)
4750 x 2230 x 1740
Tyre size in inches
13
Internal dimensions in mm (LxWxH)
3000 x 1600 x 270
Load capacity in kg
2260
Load height in mm
470
 
 

Senko 353016

Permissible gross weight in kg
3500
braked
Body dimensions in mm (LxWxH)
4680 x 2230 x 1740
Tyre size in inches
13
Internal dimensions in mm (LxWxH)
3000 x 1600 x 270
Load capacity in kg
2740
Load height in mm
470
 
 

Senko 303718

Permissible gross weight in kg
3000
braked
Body dimensions in mm (LxWxH)
5500 x 2480 x 1740
Tyre size in inches
13
Internal dimensions in mm (LxWxH)
3750 x 1850 x 270
Load capacity in kg
2140
Load height in mm
470
 
 

Senko 353718

Permissible gross weight in kg
3500
braked
Body dimensions in mm (LxWxH)
5470 x 2480 x 1740
Tyre size in inches
13
Internal dimensions in mm (LxWxH)
3750 x 1850 x 270
Load capacity in kg
2620
Load height in mm
470
 
 

Images similar; some images show special equipment.