Cooling trailer HGK Deluxe

Compact cooling solution

Convenient for beverages and other refrigerated goods
i

V drawbar, hot-dip galvanised

i

13-pin plug and reversing light

i

Interiour light

i

Insulated floor plate 65 mm thick, with anti-slip coating

i

Side walls made of PurFerro sandwich panels, 60 mm thick, steel top layer

i

Double-wing cooling doors with cold room door lock (emergency opening from inside), lockable

i

Stainless steel hinges

i

Cooling unit from Govi

i

Side and front inside: Scratch protection, approx. 150 mm high, made of aluminium sheet metal

i

4 telescopic crank supports, swivel-mounted

i

Automatic jockey wheel

i

Humbaur multifunctional lighting with reversing light.

i

Handle for manoeuvring

The Humbaur HGK Deluxe is a compact cooling trailer with professional equipment. The single-axle car trailer has a load capacity of approximately 510 kg at a total permissible weight of 1300 kg. Its frame and chassis are made of hot-dip galvanised steel, as is the welded rear portal; the bezels and the rear rain channel are made of anodised aluminium. The box body is constructed from 60-mm-thick PurFerro sandwich panels consisting of a polyurethane foam core with outer layers made of galvanised and powder-coated sheet steel. The insulated floor is some 65 mm thick and does not allow any of the cold to escape downwards. It is also equipped with an anti-slip coating. The cooling unit used is from the well-known Govi brand; operating with a 230-V supply, it allows the trailer to be cooled down to temperatures from +2øC to +10øC while stationary. Cooling while driving is not possible due to the design. Four swivelling telescopic crank supports ensure that the trailer can be safely parked, while the 150-mm-high aluminium scuff plate which runs around the inside gives the surfaces extra durability.

The cooling trailer HGK Deluxe in detail:

V drawbar, hot-dip galvanised
13-pin plug and reversing light
Interiour light
Insulated floor plate 65 mm thick, with anti-slip coating
Side walls made of PurFerro sandwich panels, 60 mm thick, steel top layer
Double-wing cooling doors with cold room door lock
Stainless steel hinges
Cooling unit from Govi
Side and front inside: Scratch protection, approx. 150 mm high, made of aluminium sheet metal
4 telescopic crank supports, swivel-mounted
Automatic jockey wheel
Humbaur multifunctional lighting with reversing light
Handle for manoeuvring

Technical data

HGK Deluxe

Trailer HGK Deluxe in detail
HGK Deluxe silhouette sideview
Inner height 1.970 mmTotal height 2.680 mm
Inner length 2.630 mmTotal length 4.135 mm
HGK Deluxe silhouette backside
Inner width 1.470 mmTotal width 2.050 mm

HGK Deluxe Standard equipment

  • Hot-dip galvanised v-shaped coupling
  • 13-pin plug and reversing light, interior lighting
  • Insulated 65 mm thick base plate
  • Construction using 60 mm thick sandwich panels
  • Locking double refrigerator doors with interior emergency opening mechanism
  • Stainless steel hinges
  • refrigeration unit
  • Front and side interior anti-chafing protection, c. 150 mm high, made from corrugated sheet aluminium
  • 4 supports with bases screwed into the frame
  • Jockey wheel

HGK Deluxe Models

Permissible gross weight in kg
1300
Load capacity in kg
510
Body dimensions in mm (LxWxH)
4135 x 2050 x 2680
Internal dimensions in mm (LxWxH)
2630 x 1470 x 1970
braked
Load height in mm
590
Tyre size in inches
15

HGK 132716 - 21 PF 60 Deluxe

Permissible gross weight in kg
1300
braked
Body dimensions in mm (LxWxH)
4135 x 2050 x 2680
Tyre size in inches
15
Internal dimensions in mm (LxWxH)
2630 x 1470 x 1970
Load capacity in kg
510
Load height in mm
590
 
 

Images similar; some images show special equipment.