The middle-weight three-way tipper

Tandem three-way tippers

htk 14t.

To the models
Designed for the highest level of endurance and variability

The most important features of the HTK 14t models

HTK 14t

Easy to use.

  • Steplessly adjustable draw tube
  • 15-pin connector
  • Motorised hydraulic three-way tipper

HTK 14t

Use it for life.

  • Solid, welded and hot-dip galvanised frame
  • Hot-dip galvanised with longitudinal, lateral and diagonal braces for exceptional stability and concentrated loads

Additional equipment features

Axle with drum brake, no-maintenance parabolic suspension for optimal load compensation

Compressed air brake with release valve, automatic load-dependent ALB brake, connecting lines with couplings in red/yellow, ABS system with spinal parking brake

 Central bar with 40-mm-diameter screw towing eye, galvanised, can be infinitely adjusted via the crank handle

  • 24V lighting system with multi-chamber tail lights and LED lateral lights
  • 15-pin connector

Lashing points 3 t set into the bridge floor (4 pairs / 4.5 m; 5 pairs / 5.0 m; 6 pairs / 5.5 m)

  • Solid, welded and galvanised frame for optimal stability and safety; bridge floor made of 4 mm fine-grain steel, non-interchangeable rocker bearings
  • Motorised hydraulic three-way tipping system, five-level cylinder with lift limiter
  • Mudguards with anti-spray mats
  • 2 wheel chocks with holder
  • Reinforced 12 t gear-supported jack with load and overdrive speed
  • Laser-welded quality steel side walls 500 mm, can be folded down on the sides and at the back, removable and oscillating with central locking mechanism, removable front wall
  • Bridge frame hot-dip galvanised with longitudinal, lateral and diagonal braces for exceptional stability and concentrated loads
  • Side walls primed and lacquered with high-quality 2K paint for optimal corrosion protection, sealed hollow spaces, your choice of single-colour paint in RAL

Optional accessories

Original Humbaur accessories in original Humbaur quality are available from our webshop.

Browse now

Models

  • HTK 145524

    somewhat longer, but with somewhat lower payload

    Gross weight:
    14 400 kg
    Load capacity:
    10 300 kg
    Inner length:
    5 540 mm
    Inner width:
    2 420 mm
    Configure
  • HTK 145024

    somewhat shorter, but with somewhat higher payload

    Gross weight:
    14 400 kg
    Load capacity:
    10 600 kg
    Inner length:
    5 040 mm
    Inner width:
    2 420 mm
    Configure

Compare models


HTK 145524 HTK 145024
Total permissible weight in kg 14,400 14,400
Overall dimension in mm (LxWxH) 7,450 x 2,550 x 1,610 6,950 x 2,550 x 1,610
Payload in kg 10,300 10,600
Load height in mm 1,070 1,070
Tipping slope (to side/back) in degrees 45/48 45/48
Tyres in inches 235/75 R17.5 235/75 R17.5

Subject to technical modifications. All dimensions are approximate values and refer to the standard vehicle without accessories. Additional equipment changes both the unladen weight and the load capacity!

Would you like support in configuring the model you want? 

We would be happy to advise you on the configuration of your personalised trailer from the HTK series! 

Arrange a consultation now

Humbaur specialist partners near you

We have more than 500 specialist partners throughout Germany providing sales and service support. Find a Humbaur partner in your area!

Find a dealer now

All information is provided without guarantee. Subject to change without notice. Images may show optional equipment. Accessories are available as an option.