The lowerable all-rounder

Senko lowerable transporter.

To the models

Stable and hard-wearing

The most important features of the Senko models

Available as a tandem

Accommodates your needs

Loading platform can be conveniently lowered hydraulically by means of a hand pump or you also have the option of lowering it electronically
Lowerable rubber spring axles
Almost flat loading angle

Hugely robust

Side panels made from 3 mm thick sheet steel
Withstands the greatest loads
Lashing rings tested by Dekra for a tensile load of 800 kg
All vehicle components hot-dip galvanised in an immersion bath

Additional features

Body

Welded side panel/frame construction made of sheet steel, hot-dip galvanised in an immersion bath
Bolted V drawbar, hot-dip galvanised
Ramp gate hot-dip galvanised in an immersion bath with non-slip mesh surface and gas spring support
Fully automatic jockey wheel
Electrics

13-pin plug

Reversing light

Lighting fitted on the side
Securing loads

Fitted tie-down rings x 10 (5 pairs) in the outer frame for 3000 mm body length and x 12 (6 pairs) for 3750/3990 mm body length; each tie-down ring is able to withstand a tensile force of 1000 kg
Body

Welded side panel/frame construction made of sheet steel, hot-dip galvanised in an immersion bath
Bolted V drawbar, hot-dip galvanised
Ramp gate hot-dip galvanised in an immersion bath with non-slip mesh surface and gas spring support
Fully automatic jockey wheel
Electrics

13-pin plug

Reversing light

Lighting fitted on the side
Securing loads

Fitted tie-down rings x 10 (5 pairs) in the outer frame for 3000 mm body length and x 12 (6 pairs) for 3750/3990 mm body length; each tie-down ring is able to withstand a tensile force of 1000 kg
Body

Welded side panel/frame construction made of sheet steel, hot-dip galvanised in an immersion bath
Bolted V drawbar, hot-dip galvanised
Ramp gate hot-dip galvanised in an immersion bath with non-slip mesh surface and gas spring support
Fully automatic jockey wheel
Electrics

13-pin plug

Reversing light

Lighting fitted on the side
Securing loads

Fitted tie-down rings x 10 (5 pairs) in the outer frame for 3000 mm body length and x 12 (6 pairs) for 3750/3990 mm body length; each tie-down ring is able to withstand a tensile force of 1000 kg

Models

Senko 303016

Braked, Two axle

Gross weight:

3 000 kg

Load capacity:

2 260 kg

Inner length:

3 000 mm

Inner width:

1 600 mm

from 11.396,98 CHF

Configure
Senko 303718

Braked, Two axle

Gross weight:

3 000 kg

Load capacity:

2 140 kg

Inner length:

3 750 mm

Inner width:

1 850 mm

from 12.167,74 CHF

Configure
Senko 353016

Braked, Two axle

Gross weight:

3 500 kg

Load capacity:

2 740 kg

Inner length:

3 000 mm

Inner width:

1 600 mm

from 12.225,03 CHF

Configure
Senko 353718

Braked, Two axle

Gross weight:

3 500 kg

Load capacity:

2 620 kg

Inner length:

3 750 mm

Inner width:

1 850 mm

from 12.613,11 CHF

Configure

Would you like help configuring the model you want?

We would be happy to advise you on the configuration of your personalised Senko trailer!

Arrange a consultation now

Humbaur specialist partners near you

We have more than 500 specialist partners throughout Germany providing sales and service support. Find a Humbaur partner in your area!

Find a dealer now

All information is provided without guarantee. Subject to change without notice. Illustrations may show optional extras. Accessories are available as an option.